Available Part Numbers:
6315, 6315-KT0000, P19-232B, P19-232A
]]>6315, 6315-KT0000, P19-232B, P19-232A
• Spout and stem are stainless steel.
• Spout top is approximately 3" above vanity top.
• Standard spout lengths are 4" or 6".
• Soap bottle is translucent, shatter-resistant polyethylene and can be ordered in 20 oz or 32 oz capacity.
• Dispenser can be refilled by using the included special refill key.
Available Part Numbers:
0332, 0332-C, 0332-CD, 0332-D
0332, 0332-C, 0332-CD, 0332-D
Click here to view cut sheet]]>
Part Number:
A0351
A0351
Click here to view cut sheet]]>
- "TRADITIONAL" COLLECTION- Metal Lockers, visually appealing and very durable. Is our most widely distributed locker line. Offering the most value for typical locker applications.
- "COMPETITOR" COLLECTION- Metal Lockers, offers ventilation and visibility combined with strength and visual appeal.
- PLASTIC LOCKERS- Ideal for high-humidity moisture applications, as these virtually maintenance-free lockers will never rust, rot, corrode or fade
- PHENOLIC LOCKERS- Material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time.
- Single Tier
- Double Tier
- Three Tier
- Four Tier
- Five Tier
- Six Tier
- 2 Person
- 4 Wall Mouint
- 16 Person
HH525 ]]>
• Approximately .7 ml per use
• Easy to use and refill
• Large window for easy view of soap supply
• Reservoir holds 1,000 ml
• 4-1/2" w x 10-1/4" h x 4-1/2" d
Part Number:
SF2111BK, SF2111WH, SF2111PL
]]>SF2111BK, SF2111WH, SF2111PL
Part Number:
0362-41
]]>0362-41
Part Number:
0210-41
0210-41
]]>
Part Number:
0345-41
0345-41
]]>
Part Number:
0347-41
0347-41
]]>
1005B, 1005BC ]]>
1002B ]]>
1006B ]]>
1504B ]]>
1503B ]]>
K241P ]]>
MP275 ]]>
Part Number:
MP325
]]>MP325
MP329 ]]>
• Please send a picture if you don't see your parts below.
]]>
Part Number:
0C410
]]>0C410
Part Number:
MP375
]]>MP375
Part Number:
MP350
]]>MP350
Part Number:
0C400
]]>0C400
Part Number:
0C300A
]]>0C300A
Part Number:
0C300
]]>0C300
MP276 ]]>
Part Number:
MP425
]]>MP425
MP379 ]]>
Part Number:
MP450
]]>MP450
T317 ]]>
• Please send a picture if you don't see your parts below.
]]>
Part Number:
A2139
]]>A2139
• Mirrors are a fragile product and are shipped directly from the factory as they have the best packaging to minimize breakage in transit.
• In spite of their efforts, breakage/damage occurs at a higher rate than other products, so please pay particular attention when receiving mirrors.
• Damaged and/or missing mirrors must be noted on the delivery receipt or refused at the time of delivery and reported to us immediately.
]]>
Available Part Numbers:
8215-3, 8215-4, 8215-5
]]>8215-3, 8215-4, 8215-5
Available Part Numbers:
AT179TS, AT179WH, AT179BK
]]>AT179TS, AT179WH, AT179BK
6320B ]]>
6320A ]]>
Send us a picture to help@allpartitions.com, we can help!]]>
Part Number:
FOOTPULL1
]]>FOOTPULL1
HH700 ]]>
G0232 ]]>
T117 ]]>
AM200 ]]>
F0312 ]]>
AM220 ]]>
AA107 ]]>
Part Number:
C3002
]]>C3002
Part Number:
K241M
]]>K241M
Click here to view keepers and stops.
Click here to view a different type of hardware.]]>
1000B ]]>
1500B ]]>
A0176C, A2878 ]]>
A0164, A0165, A0176, A0184]]>
A0164, A0165, A0176, A0184 ]]>
Available Part Numbers:
A1270, A1310
]]>A1270, A1310
Available Part Numbers:
A1270, A1310
]]>A1270, A1310
Available Part Numbers:
A7022, A7040, A7073
]]>A7022, A7040, A7073
Available Part Numbers:
SS075, SS087, SS106, SS131
]]>SS075, SS087, SS106, SS131
View Spec Sheets:
0834 or 0839
Available Part Numbers:
0834, 0839
]]>0834, 0839
G015E ]]>
Available Part Numbers:
HAP58, HAP56, HAP54
]]>HAP58, HAP56, HAP54
A1155, A1117 ]]>
A5053 ]]>
A5063 ]]>
• Part # A0191 would be used to connect 1" panels to intermediate stall pilasters Part Numbers:
A0189, A0190, A0191, A0194]]>
• Part # A0191 would be used to connect 1" panels to intermediate stall pilasters
Available Part Numbers:
A0189, A0190, A0191, A0194
]]>A0189, A0190, A0191, A0194
A0155 ]]>
• Part #A8340 is chrome plated zamak (shown above)
• Part# A8369 is stainless steel
Available Part Numbers:
A8369, A8340
]]>A8369, A8340
A1563, A1623, A1633, A1753, A1833 ]]>
A1899, A1909, A1919, A1949 ]]>
Please call if you find a product cheaper or need help finding a particular product Products are cutting edge
• Meet latest ADA requirements.
• Latest in no-touch technology.
• Yield lower maintenance & supply costs.
• Increase customer satisfaction.]]>
Call if you don't see what you need. Our Prices are Low.
Please call if you find a price cheaper. Products are cutting edge:
- Meets latest ADA requirements.
- Latest in no-touch technology.
- Yield lower maintenance & supply costs.
- Increase customer satisfaction.]]>
A2189, A2319, A2329, A2999 ]]>
A2219, A2239, A2279, A2299 ]]>
Available Part Numbers:
A2209, A2229, A2269, A2289
]]>A2209, A2229, A2269, A2289
• 2 1/2" long
• Stamped stainless steel.
Available Part Numbers:
A11359, A11369
]]>A11359, A11369
- Powder Coated Steel material is least expensive.
- Plastic Laminated Particle Board costs about 7% more than Powder Coated Steel.
- Solid Polymer Plastic (HDPE) costs about 80% more than Powder Coated Steel.
- Solid Phenolic Black Core costs about 85% more than Powder Coated Steel.
- Stainless Steel costs slightly more than twice as much as Powder Coated Steel.
- Solid Phenolic Color-Thru costs about 2 1/2 times the cost of Powder Coated Steel.
All Partitions and Parts offers 4 types of restroom toilet partition stalls. Each type of partition presents its own advantages and benefits. Here we've laid out some basic details for each as well as our own recommendations to help you determine which partition type will fit your project the best.
But first, while there are differences between the 4, there are similarities.
For instance, with any type of partition, all have a standard door and panel height of 58" (4.8 feet) and sit 12" off the floor. However, with new preferences for more privacy, we now have 64" (5.3 feet) high doors and panels or 72" (6 feet) doors with 76" (6.3 feet) panels now available.
Also, we have no-sight line solutions which are now available with continuous hinges, full height stops and full height channels.
When ordering, let us know your preferences by calling us or adding it to your quote sheet.
Partition Stall Differences
Floor Anchored/ Overhead Braced Partitions
Floor Anchored/ Overhead Braced partitions are the least expensive.
This type of partition stall is the most economical and popular among our customers. It includes 82" high pilasters which mount on the floor and go 12" above the doors and panels. The overhead brace is a headrail which connects the tops of the pilasters for added strength. This type of partition is recommended for higher traffic areas which could possibly be prone to vandalism. It is recommended for use with lighter weight concrete and plywood.
Floor Mounted Partitions
Floor Mounted Partitions cost about 4% more than Floor Anchored/ Overhead Braced Partitions.
Floor Anchored partitions are being used less and less according to our customers. The partitions are anchored to the floor with 70" high pilasters which go from the floor to the tops of the doors and panels. The panels are also anchored to the back wall for extra support. This the only style of partition which has a flush top line which gives it a more modern and contemporary appearance. The low height makes it especially suitable for low ceiling areas. Floor Anchored partitions have a more simplified construction that makes it easier to install. It's recommended for concrete floors only with a 2" minimum penetration into the floor required.
Ceiling Hung Partitions
Ceiling Hung Partitions cost about 7% more than Floor Anchored/ Overhead Braced Partitions.
Ceiling Hung Partitions are supported by the ceiling, there are no pilasters extending to the floor. This gives it an open design which provides an unobstructed floor area for a clean look and easier overall maintenance. When used with other wall-hung fixtures, the entire floor area is accessible for more efficient cleaning. Structural steel ceiling supports are necessary to assure proper and safe installation.
Floor to Ceiling Anchored Partitions
Floor to Ceiling Anchored Partitions cost about 7% more than Floor Anchored/ Overhead Braced Partitions.
Floor to Ceiling anchored partitions are recommended for busy washrooms where abusive treatment is possible and vandal resistance is critical. Pilasters are anchored to structural ceiling support and mounted in concrete flooring which makes this construction style very stable and durable. Both doors and panels normally sit 12" above the floor.
Get started by choosing your partition style and material.
]]>E5818 ]]>
Available Part Numbers:
0462-AD, 0462-AD-9
]]>0462-AD, 0462-AD-9
Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required.
• These lockers are fabricated to stand the test of time.
• The dense components, combined with stainless steel brackets and fasteners, stand up to the most extreme conditions of moisture and humidity.
• Phenolic is impact, water, and corrosion resistant, and does not support bacteria.
• The superior construction and materials used in the locker system make it adaptable to all types of facilities, including health clubs, country clubs, and executive washrooms.
• Available in the following styles: single-, double-, triple-, five-, and six-tier standard doors (single unit construction) and Z-Style Suit Locker (2 lockers per unit).
• Phenolic lockers can easily be customized.
Standard features:
• 1/2" doors, tops and bottoms
• 8" sides and backs
• Full length 16-gauge stainless steel piano hinge
• White interior
• Recessed handle
• 10 designer colors
OPTIONAL FEATURES • 1,2,3,5,6 tier; 2 person lockers per frame,
• Range of widths, depths and heights
• 8 colors available
• Against wall Surface*, recessed
• No base required*, 4" base
• User combination lock*, built in lock
"*" most common.
Call for information. Send in a drawing for us to quote from.]]>
Mobile users scroll down & click Color Charts link at the bottom.
Available Part Numbers:
SS075P, SS087P, SS106P, SS131P
]]>SS075P, SS087P, SS106P, SS131P
Part Number:
A7087
]]>A7087
• Height adjusts 7 1/2" to 14" Part Numbers:
A8503, A8513, A8509, A8519, A8518, A8508]]>
• Height adjusts 7 1/2" to 14"
Available Part Numbers:
A8503, A8513, A8509, A8519, A8518, A8508
]]>A8503, A8513, A8509, A8519, A8518, A8508
A0309 ]]>
A1056 ]]>
A07192, A07193, A07194 ]]>
A1873, A1893, A1903, A1913 ]]>
A1573, A1643, A1653, A1763SS, A1843 ]]>
A1649, A1659, A1769, A1849 ]]>
A1629, A1639, A1759, A1839 ]]>
Click here to go to another type of hardware.]]>A70B3 ]]>
AM270 ]]>
F0312, F0317, F0311]]>
F0311 ]]>
C3006 ]]>
HH600 ]]>
G0237 ]]>
K0231 ]]>
AA108 ]]>
Available Part Numbers:
SF2135TS, SF2144TS
]]>SF2135TS, SF2144TS
• Decorative plastic laminate bonded under pressure to solid impact-resistant particle board core.
• Includes standard chrome hardware to attach to 1in square edge pilasters. Satin stainless steel hardware is also available.
• Flat wall keeper and continuous stainless steel hinge available for mounting to flat wall.
• Hinge cam action permits door to remain at desired position.
• Doors can be lifted to allow for emergency access.
• Lead time is approx. 7-10 days. Transit time is additional.
• Due to the UPS oversize box charge all doors must ship via motor freight.
View Color Chart *Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
• Decorative plastic laminate bonded under pressure to solid impact-resistant particle board core.
• Includes standard chrome hardware to attach to 1in square edge pilasters. Satin stainless steel hardware is also available.
• Flat wall keeper and continuous stainless steel hinge available for mounting to flat wall.
• Hinge cam action permits door to remain at desired position.
• Doors can be lifted to allow for emergency access.
• Lead time is approx. 7-10 days. Transit time is additional.
• Due to the UPS oversize box charge all doors must ship via motor freight.
Click on diagram below for an explanation on door hand and swing:
View Color Chart
*Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
• Decorative plastic laminate bonded under pressure to solid impact-resistant particle board core.
• Select from a variety of hardware to install: bright chrome or satin stainless steel two ear or one ear stirrup brackets, or a full height aluminum or satin stainless steel channels.
• Lead time is approx. 7-10 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart]]>
• Decorative plastic laminate bonded under pressure to solid impact-resistant particle board core.
• Select from a variety of hardware to install: bright chrome or satin stainless steel two ear or one ear stirrup brackets, or a full height aluminum or satin stainless steel channels.
• Lead time is approx. 7-10 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart *Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
Lead time is approx. 7 to 10 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
*Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
Lead time is approx. 7 to 10 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
*Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
Lead time is approx. 7 to 10 days.
Transit time is additional. View Color Chart
*Directional Pattern Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
Lead time is approx. 7 to 10 days.
Transit time is additional. View Color Chart
*Directional Pattern Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
]]>
Add privacy between urinals or at room entrances.
- All partition screens featured here are made of plastic laminated particle board.
- Decorative laminate finishes are applied under high pressure creating a strong bond to the particle board core.
- Huge variety of colors to choose from.
- Please note: due to recent increases in oversized box shipping charges, you may be contacted for additional shipping charges
- Installation hardware included.
- 5 different styles to choose from.
Lead time is approx. 7 to 10 business days.
Transit time is additional. View Color Chart *Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
Lead time is approx. 7 to 10 business days.
Transit time is additional. View Color Chart *Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
Screens over 26"W must ship via motor freight.
Lead time is approx. 10 to 15 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
*Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
Screens over 26"W must ship via motor freight.
Lead time is approx. 10 to 15 business days.
Transit time is additional.
View Color Chart
If you want a specific width pilaster, specify in comment section as you check out.
*Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
Lead time is approx. 7 to 10 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
*Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
Lead time is approx. 7 to 10 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
*Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.]]>
Download Specifications:
Floor anchored/head rail braced
Floor mounted
Ceiling hung
Floor to ceiling]]>
Part Numbers:
SD927T
SD927T
]]>
Part Number:
AS46T
]]>AS46T
• These virtually maintenance-free lockers will never rust, rot, corrode or fade.
• Their half-inch-thick plastic construction features solid color throughout, so even scratches are hard to see
• Lockers are available in multiple configurations and are backed by a fifteen-year warranty.
Standard Features: • Constructed of high-density polyethylene (HDPE) highly-durable solid plastic • Virtually maintenance-free
• Backed by a standard 15-year warranty
• Offered in 8 designer colors that will never fade or require repainting
• Available in multiple configurations for whatever your application requires
• Available in anti-microbial and 100% postconsumer recycled material upon request
OPTIONAL FEATURES • 1,2,3,5,6 tier lockers per frame,
• Range of 12", 15", 18" widths, 12", 15", 18" depths and 72" heights
• 8 colors available
• Against wall Surface*, recessed
• No base required*, 4" base
• Flat*, slope top
• User combination lock*
"*" most common.
Call for information. Send in a drawing for us to quote from.]]>
Available Part Numbers: SF820BK, SF820WH
]]>
Available Part Numbers: SD820BK, SD820WH
]]>A1114, A1106 ]]>
To see the colors more accurately please ask us to mail you a color chart.]]>
• Door hand and and swing are NOT interchangeable. Please verify the hand and swing of your door before ordering.
• Standard doors are 1" thick x 58" high. Doors are also available 48" high, 64" high, and 72" high. Call for pricing and lead time on 48"H, 64"H, or 72"H doors.
• Doors are sized according to the width of the door opening. Actual doors are 3/8" smaller. For example, a door for a 24"W opening is actually 23-5/8"W.
• Includes standard chrome hardware to install. Satin stainless steel hardware is also available for an upcharge.
• Standard hinges attach to 1-1/4" round edge pilasters. Hinges are available to attach to square edge pilasters for an upcharge (will not have integrated privacy and will have longer lead time). Please call for lead time and pricing on flat wall or continuous hinges.
• Standard hinge cam action permits door to be set up to remain at any desired position.
• Standard keeper is for 1-1/4" round edge pilaster. Keeper for 1-1/4" square edge is available for an upcharge (will not have integrated privacy and will have longer lead time). Call for pricing and lead time on flat wall keeper.
• New latch style is surface mounted slide latch with occupancy indicator.
• Lead time is approx. 3-5 business days for production. Transit time is additional.
• Due to UPS oversize box charge all doors must ship via motor freight.
View Color Chart
]]>
• Door hand and and swing are NOT interchangeable. Please verify the hand and swing of your door before ordering.
• Standard doors are 1" thick x 58" high. Doors are also available 48" high, 64" high, and 72" high. Call for pricing and lead time on 48"H, 64"H, or 72"H doors.
• Doors are sized according to the width of the door opening. Actual doors are 3/8" smaller. For example, a door for a 24"W opening is actually 23-5/8"W.
• Includes standard chrome hardware to install. Satin stainless steel hardware is also available for an upcharge.
• Standard hinges attach to 1-1/4" round edge pilasters. Hinges are available to attach to square edge pilasters for an upcharge (will not have integrated privacy and will have longer lead time). Please call for lead time and pricing on flat wall or continuous hinges.
• Standard hinge cam action permits door to be set up to remain at any desired position.
• Standard keeper is for 1-1/4" round edge pilaster. Keeper for 1-1/4" square edge is available for an upcharge (will not have integrated privacy and will have a longer lead time). Call for pricing and lead time on flat wall keeper.
• New latch style is surface mounted slide latch with occupancy indicator.
• Lead time is approx. 3-5 business days for production. Transit time is additional.
• Due to the UPS oversize box charge all doors must ship via motor freight.
Click on diagram below for an explanation on door hand and swing:
View Color Chart
]]>
- Extra weldments along door sides for greater strength and improved paint process for reduced rusting
- Supplied with all hardware, assembly instructions for easy installations and a bottle of touch up paint.
- Standard hinges attach to 1 1/4" round edge pilasters
- Hinges available to attach to square edge pilasters or to a flat wall. Continuous hinge also available.
- Standard hinge cam action permits door to be set up to remain at any desired position.
- Standard concealed latch; ADA and surface latch available and allow emergency access from outside stall.
- Standard doors are 58" high; also available in 48" & 70" high.
• Select a reinforced panel if you will be installing a grab bar on your panel.
• Select from a variety of hardware to install: bright chrome or satin stainless steel two ear or one ear brackets, or a full height painted or stainless steel channels.
• Lead time is approx. 3-5 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart
]]>
• Select a reinforced panel if you will be installing a grab bar on your panel.
• Select from a variety of hardware to install: bright chrome or satin stainless steel two ear or one ear brackets, or full height painted or stainless steel channels.
• Lead time is approx. 3-5 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart
]]>
• Square posts are 1-1/4" x 1-1/4" or 1-3/4" x 1-3/4".
• Supplied with brackets, pilaster/post shoe, and mounting hardware.]]>
- Metal is a standard for durability, quality at an affordable price.
- Finish is resistant to wear, fading, and scuffing.
- Easily cleaned with mild soap solution and wiped dry.
- Hybrid epoxy/polyester powder is electrostatically applied for uniform thickness over cold-rolled galvannealed steel.
- All hardware and assembly instructions are supplied.
- Contractors receive lower pricing!
- For exact prices, send in drawings to receive quote.
Click here for- "blank forms to fill out and send in ". Fax to: 1-866-255-8640 - You may order here and we will contact you to get a drawing.
- Quotes returned quickly.
- Orders are processed only after your approval.
- Motor freight shipping charges extra & shown on quote.
- Questions call: 1-866-255-8645
Download Specifications:
Floor anchored/head rail braced
Floor mounted
Ceiling hung
Floor to ceiling]]>
- All partition screens featured here are made of powder coated steel.
- Corners are welded for additional strength.
- Each comes with installation hardware.
- 5 different styles to choose from.
- Please note: due to recent increases in ground shipping cost for oversized boxes, you may be contacted for additional shipping charges ]]>
Screens over 26"W must ship via motor freight.
Lead time is approx. 10 to 15 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
]]>
Screens 26" overall width must ship via motor freight.
Lead time is approx. 10 to 15 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
]]>
Lead time is approx. 3 to 5 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
]]>
Lead time is approx. 3 to 5 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
]]>
Lead time is approx. 3 to 5 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
]]>
Lead time is approx. 3 to 5 business days.
Transit time is additional. DO TO RECENT CHANGES WITH SHIPPING UPS OR MOTOR FREIGHT, YOU MAY BE CONTACTED FOR UP CHARGE ON SHIPPING COST. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
]]>
Lead time is approx. 7 to 10 business days.
Transit time is additional. View Color Chart]]>
Lead time is approx. 7 to 10 business days.
Transit time is additional. View Color Chart]]>
Lead time is approx. 3 to 5 business days for 18"W x 48"H, 24"W x 48"H, 12"W x 58"H, 18"W x 58"H, 24"W x 58"H, or 30"W x 58"H.
Lead time is approx. 10 to 15 business days for 12"W x 48"H or 30"W x 48"H.
Transit time is additional. View Color Chart
]]>
Lead time is approx. 3 to 5 business days for 18"W x 48"H, 24"W x 48"H, 12"W x 58"H, 18"W x 58"H, 24"W x 58"H, or 30"W x 58"H.
Lead time is approx. 10 to 15 business days for 12"W x 48"H or 30"W x 48"H.
Transit time is additional. View Color Chart
]]>
S6100 ]]>
Part Number:
0690
]]>0690
Part Number:
0692
]]>0692
Part Number:
0694
]]>0694
Available Part Numbers:
0185, 0185-93
]]>0185, 0185-93
Available Part Numbers:
0458, 0458-9
]]>0458, 0458-9
Available Part Numbers:
A0473, A0473-1
A0473, A0473-1
]]>
Part Number:
0412
Click here to view cut sheet]]>0412
#F7000 Green Seal Certified Lotion Foam Soap
#F7135 Antibacterial Foam Soap
#F7500 Alcohol-Free Instant Foam Hand Sanitizer
#F7800 Alcohol Instant Foam Hand Sanitizer
Available Part Numbers:
F7000, F7135, F7500, F7800
]]>F7000, F7135, F7500, F7800
AV320
]]>
Part Number:
V321
V321
]]>HHINSERTHC ]]>
HHINSERTST ]]>
F0380 ]]>
Part Number:
A3469
]]>A3469
All Partitions & Parts is the leader in restroom accessories. If you don't see what you need, chances are we can get it! Please call. We are very competitively priced, so give us a call if you find a product cheaper. Products are the latest:
- Latest in no-touch and ultra-hygienic technology.
- Latest designs meet ADA requirements.
- Tough plastic, chrome, and stainless steel models to choose from.
- Newer products yield lower maintenance & supply costs. Update to new accessories today!
Available Part Numbers:
AT215BK, AT215TS, AT215WH
]]>AT215BK, AT215TS, AT215WH
Part Number:
AT400TS
AT400TS
]]>
A03082, A03083, A03084, A03085, A03086, A03087, A03088, A030810, A030812, A030816, A030818, A030820, A030822, A030824 ]]>
Available Part Numbers:
RSS2I, RSS2P, RSS2W
]]>RSS2I, RSS2P, RSS2W
• One of the GREENEST systems available with a controlled delivery, reduced packaging, long battery life, biodegradable, and more hand washes per refill.
• Sensor technology provides RELIABLE hands free dispensing.
• Pre-measured dispensing saves soap.
• Refills are 1200 ml - over 3,000 hand washes per refill.
• Battery life of 45,000 uses; LED light for low battery.
• Requires six "AA" alkaline batteries.
• 3 year warranty.
• 4 3/4" wide x 11 1/4" high x 4 3/4" deep.
• Can be mounted directly to wall or on stands sold below.
• Soap and sanitizer refills are sold to the right.
Available Part Numbers:
SF305BK, SF305TS, SF305WH
View Spec Sheets: A0464, A0864
Available Part Numbers:
A0864, A0464
]]>A0864, A0464
Available Part Numbers:
ASE21W, ASE21BK, ASE21B
]]>ASE21W, ASE21BK, ASE21B
Available Part Numbers:
ASE01W, ASE01BK, ASE01B
]]>ASE01W, ASE01BK, ASE01B
Available Part Numbers:
ASE1000, ASE2500
]]>ASE1000, ASE2500
S7770SS ]]>
• Please send a picture if you don't see your parts below.
• Sanymetal hardware is being discontinued. Limited quantities available.
]]>
no longer sold separately.]]>
S8819 ]]>
S7780SS ]]>
HAS010SS ]]>
]]>
Part Number:
A6983
]]>A6983
A147413 ]]>
• Please send a picture if you don't see your parts below.
]]>
HLSLA ]]>
View Chart]]>
Available Part Numbers:
159, 160, 161, 162, 164, 165, 166, 167, 169
]]>159, 160, 161, 162, 164, 165, 166, 167, 169
Available Part Numbers:
DRIVERKIT, A8965, A96513, A96503, A9523, A96533
]]>DRIVERKIT, A8965, A96513, A96503, A9523, A96533
Available Part Numbers:
1308-3, 1308-4
]]>1308-3, 1308-4
Available Part Numbers:
1315-3, 1315-4, 1315-5
]]>1315-3, 1315-4, 1315-5
Call if you don't see what you need.
Our prices are low.
Please call if you find a product cheaper.
Products are cutting edge
• Meet latest ADA requirements.
• Latest in no-touch technology.
• Yield lower maintenance & supply costs.
• Increase customer satisfaction.]]>
Part Number:
HH135
]]>HH135
Part Number:
HH135
]]>HH135
Hooks are also available for rectangular head rail and slotted head rail. General rule is to use 1 plus a hook for every 6" of curtain you order. i.e. for a 36" wide curtain use 7 hooks, 48" use 9, 72" use 13 etc.]]>
Available with or without built in shower seats. Also accepts retractable shower seat.
Constructed of Phenolic or Solid Plastic.
Solid plastic ships in approx. 5 days; Phenolic ships in approx. 7-10 days.
Click on image on right for available colors:
Get actual pricing by sending us a sketch of your restrooms. Click here for blank forms to fill out and send in. Quotes will be returned within hours.]]>
- We are very competitive and keep our prices at industry low. Please call if you find a product cheaper.
- Upgrade your shower room to meet the most recent ADA requirements.
- Products are cutting edge, with latest in no-touch technology, keeping germs at bay with contactless equipment.
- Yield lower maintenance & supply costs.
- Increase customer satisfaction!
- Benches & Pedestals
- Cubicle Track, Hooks and Hospital Curtains
- Curtain Hooks
- Curtains & Shower Rods
- Dividers & Dressing Compartments
- Screens
- Retractable Shower Seats
- Wall hooks
Available Part Numbers:
H5060A, H5060
]]>H5060A, H5060
• Projects 3 1/4"; 3" diameter.
• Concealed screws.
Part Number:
H5021
]]>H5021
• Concealed mounting.
Part Number:
H3731
]]>H3731
Part Number:
KJ898
]]>KJ898
Projects 2-5/16".
Part Number:
7308
]]>7308
Part Number:7308
]]>
Part Number:
A0270
]]>A0270
Part Number:
7305-41
7305-41
]]>
Part Number:
AT815
]]>AT815
Part Number:
A0330
]]>A0330
Part Number:
AM500
]]>AM500
Part Number:
HH125
]]>HH125
G0136 ]]>
T290 ]]>
9/16" bar to door clearance.
]]>
9/16" bar to door clearance.
Part Number:
F0302
]]>F0302
Part Number:
CP100
]]>CP100
S7431 ]]>
Available Part Numbers:
S7431
]]>S7431
Part Number:
F0302
]]>F0302
G0137 ]]>
HLSLA ]]>
T160N ]]>
A6069 ]]>
Part Number:
A50653
]]>A50653
Part Number:
A50553
]]>A50553
• Includes 2 gallon reusable leak proof PVC pail.
• Lid opens by pressing foot pedal.
• Overall dimensions: 8-9/32" Diameter x 12-3/4".
Select finish:
7317 for bright finish or 7317-S for satin finish.
Available Part Numbers:
7317, 7317-S
7317, 7317-S
]]>19106 ]]>
Part Number:
A0706
]]>A0706
Call if you don't see what you need.
Our prices are low.
Please call if you find a product cheaper.
Products are cutting edge
• Meet latest ADA requirements.
• Latest in no-touch technology.
• Yield lower maintenance & supply costs.
• Increase customer satisfaction.]]>
Part Number:
A0500
]]>A0500
Download Specifications:
]]>
Lead time is approx. 5 to 7 business days.
Transit time is additional.
View Color Chart
If you want a specific width pilaster, specify in comment section as you check out.
]]>
Screens over 26"W must ship via motor freight.
Lead time is approx. 10 to 15 business days.
Transit time is additional.
View Color Chart
If you want a specific width pilaster, specify in comment section as you check out.
]]>
Lead time is approx. 10 to 15 business days.
Transit time is additional.
View Color Chart
If you want a specific width pilaster, specify in comment section as you check out.
]]>
Lead time is approx. 7 to 10 business days.
Transit time is additional.
View Color Chart]]>
Lead time is approx. 5 to 7 days.
Transit time is additional.
View Color Chart]]>
]]>
Add privacy between urinals or at room entrances.
- All urinal screens featured here are made of black core solid phenolic.
- Solid core with thin laminate veneer on each side.
- Installation hardware included.
- 5 different styles to choose from.
- Please note: due to recent increases in ground shipping cost for oversized boxes, you may be contacted for additional shipping charges
Lead time is approx. 7 to 10 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
]]>
Lead time is approx. 7 to 10 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
]]>
Screens over 26"W must ship via motor freight.
Lead time is approx. 10 to 15 business days.
Transit time is additional. View Color Chart
If you want a specific width pilaster, specify in comment section as you check out.
]]>
Screens over 26"W must ship via motor freight.
Lead time is approx. 10 to 15 business days.
Transit time is additional. View Color Chart
If you want a specific width pilaster, specify in comment section as you check out.
]]>
Lead time is approx. 10 to 15 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
]]>
Lead time is approx. 10 to 15 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
]]>
Lead time is approx. 7 to 10 business days.
Transit time is additional.
View Color Chart]]>
Lead time is approx. 7 to 10 business days.
Transit time is additional.
View Color Chart]]>
Lead time is approx. 7 to 10 days.
Transit time is additional. View Color Chart]]>
Lead time is approx. 7 to 10 days.
Transit time is additional. View Color Chart]]>
• Installation hardware included.
]]>
Add privacy between urinals or at room entrances.
- All partition screens featured here are made of color thru solid phenolic.
- Same color all the way through.
- Durable and moisture resistant.
- Installation hardware included.
- 5 different styles to choose from.
- Please note: due to recent increases in ground shipping cost for oversized boxes, you may be contacted for additional shipping charges
]]>
• Decoratively faced on both sides of a resin-impregnated kraft paper core. The surface and core sheets are fused together at a high temperature and pressure.
• Superior strength, durability, and moisture resistance.
• Includes standard satin stainless steel hardware to attach to 3/4" square edge pilasters.
• Hinge cam action permits door to remain at desired position.
• Slide latch allows for emergency access from outside stall.
• Lead time is approx. 5-7 days. Transit time is additional.
• Due to the UPS oversize box charge all doors must ship via motor freight.
View Color Chart]]>
• Decoratively faced on both sides of a resin-impregnated kraft paper core. The surface and core sheets are fused together at a high temperature and pressure.
• Superior strength, durability, and moisture resistance.
• Includes standard satin stainless steel hardware to attach to 3/4" square edge pilasters.
• Hinge cam action permits door to remain at desired position.
• Slide latch allows for emergency access from outside stall.
• Lead time is approx. 5-7 days. Transit time is additional.
• Due to the UPS oversize box charge all doors must ship via motor freight.
Click on diagram below for an explanation on door hand and swing:
View Color Chart]]>
• Adds value and durability to regular phenolic, with constant color throughout.
• Highly resistant to moisture, graffiti, and impact.
• Includes standard satin stainless steel hardware to attach to 3/4" square edge pilasters.
• Hinge cam action permits door to remain at desired position.
• Slide latch allows emergency access from outside stall
• Lead time is approx. 7-10 days. Transit time is additional.
• Due to the UPS oversize box charge all doors must ship via motor freight.
View Color Chart]]>
• Adds value and durability to regular phenolic, with constant color throughout.
• Highly resistant to moisture, graffiti, and impact.
• Includes standard satin stainless steel hardware to attach to 3/4" square edge pilasters.
• Hinge cam action permits door to remain at desired position.
• Slide latch allows emergency access from outside stall
• Lead time is approx. 7-10 days. Transit time is additional.
• Due to the UPS oversize box charge all doors must ship via motor freight.
Click on diagram below for an explanation on door hand and swing:
View Color Chart]]>
• Decoratively faced on both sides of a resin-impregnated kraft paper core. The surface and core sheets are fused together at a high temperature and pressure.
• Superior strength, durability, and moisture resistance.
• Select from a variety of hardware: satin stainless steel two ear or one ear stirrup brackets or full height satin stainless steel channels.
• Lead time is approx. 5-7 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart]]>
• Decoratively faced on both sides of a resin-impregnated kraft paper core. The surface and core sheets are fused together at a high temperature and pressure.
• Superior strength, durability, and moisture resistance.
• Select from a variety of hardware: satin stainless steel two ear or one ear stirrup brackets or full height satin stainless steel channels.
• Lead time is approx. 5-7 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart]]>
• Adds value and durability to regular phenolic, with constant color throughout.
• Highly resistant to moisture, graffiti, and impact.
• Select from a variety of hardware: satin stainless steel two ear or one ear stirrup brackets or full height satin stainless steel channels.
• Lead time is approx. 7-10 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart]]>
• Adds value and durability to regular phenolic, with constant color throughout.
• Highly resistant to moisture, graffiti, and impact.
• Select from a variety of hardware: satin stainless steel two ear or one ear stirrup brackets or full height satin stainless steel channels.
• Lead time is approx. 7-10 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart]]>
• Made of HDPE with same color throughout.
• Lightly textured surface hides vandalism.
• Water resistant and unaffected by steam or high moisture.
• Includes standard 8" wrap around aluminum hinges and 6" aluminum strike/keeper to attach to 1" square edge pilasters. Satin finish vault hinges and door hardware are also available.
• Use flat wall keeper and continuous cam action stainless steel hinge to mount to flat wall.
• Hinge cam action permits door to remain at desired position.
• Slide latch allows for emergency access from outside stall.
• Lead time is approx. 4-5 days. Transit time is additional.
• Due to the UPS oversize box charge all doors must ship via motor freight.
View Color Chart]]>
• Made of HDPE with same color throughout.
• Lightly textured surface hides vandalism.
• Water resistant and unaffected by steam or high moisture.
• Includes standard 8" wrap around aluminum hinges and 6" aluminum strike/keeper to attach to 1" square edge pilasters. Satin finish vault hinges and door hardware are also available.
• Use flat wall keeper and continuous cam action stainless steel hinge to mount to flat wall.
• Hinge cam action permits door to remain at desired position.
• Slide latch allows for emergency access from outside stall.
• Lead time is approx. 4-5 days. Transit time is additional.
• Due to the UPS oversize box charge all doors must ship via motor freight.
Click on diagram below for an explanation on door hand and swing:
View Color Chart]]>
T460 This item has been discontinued by Mills and is no longer available. Replace with Part numbers: A6983, A147413, A5173]]>
G631KN ]]>
• Made of HDPE with same color throughout.
• Lightly textured surface hides vandalism.
• Water resistant and unaffected by steam or high moisture.
• Select from a variety of hardware: aluminum two ear or one ear stirrup brackets, or full height aluminum or satin stainless steel channels.
• Lead time is approx. 4-5 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart]]>
• Made of HDPE with same color throughout.
• Lightly textured surface hides vandalism.
• Water resistant and unaffected by steam or high moisture.
• Select from a variety of hardware: aluminum two ear or one ear stirrup brackets, or full height aluminum or satin stainless steel channels.
• Lead time is approx. 4-5 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart]]>
Available with or without built in shower seats. Also accepts retractable shower seats.
Constructed of Phenolic or Solid Plastic.
Solid plastic ships in approx. 5 days; Phenolic ships in approx. 7-10 days.
Click on image on right for available colors:
Get actual pricing by sending us a sketch of your restrooms. Click here for blank forms to fill out and send in. Quotes will be returned within hours.]]>
View Color Chart
Lead time is usually 10-15 business days from date of order. Transit time is additional.
MUST SHIP VIA MOTOR FREIGHT.]]>
Download Specifications: ]]>
Lead time is approx. 4 to 5 days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comments section as you check out.]]>
Lead time is approx. 4 to 5 days.
Transit time is additional. View Color Chart]]>
Lead time is approx. 4 to 5 days.
Transit time is additional. View Color Chart]]>
]]>
Add privacy between urinals or at room entrances.
- All partition screens featured here are made of solid polymer plastic (HDPE).
- Same color all the way through.
- Water resistant and unaffected by steam or high humidity.
- Installation hardware is included.
- 5 different styles to choose from.
- Please note: due to recent increases in ground shipping cost for oversized boxes, you may be contacted for additional shipping charges
Lead time is approx. 7 to 10 days.
Transit time is additional. View Color Chart]]>
Screens over 26"W must ship via motor freight.
Lead time is approx. 10 to 15 business days.
Transit time is additional. View Color Chart If you want a specific width pilaster, specify in comment section as you check out.
]]>
19111 ]]>
A34029, A34039, A34049, A34059, A34069, A34079, A34089, A34099, A34109, A34129, A34169, A34189, A34209, A34229, A34249 ]]>
A03062, A03063, A03064, A03065, A03066, A03067, A03068, A03069, A030610, A030612, A030614, A030616, A030618, A030620, A030622, A030624 ]]>
K1152 ]]>
Download Specifications:
Floor anchored/head rail braced
Floor mounted
Ceiling hung
Floor to ceiling]]>
G0230SS ]]>
A7057 ]]>
Part Number:
AT0215
AT0215
]]>• Door hand and and swing are NOT interchangeable. Please verify the hand and swing of your door before ordering.
• Standard doors are 1" thick x 58" high. Doors are also available 48" high, 64" high, and 72" high. Call for pricing and lead time on 48"H, 64"H, or 72"H doors.
• Doors are sized according to the width of the door opening. Actual doors are 3/8" smaller. For example, a door for a 24"W opening is actually 23-5/8"W.
• Includes standard chrome hardware to install. Satin stainless steel hardware is available for an upcharge.
• Standard hinges attach to 1-1/4" round edge pilasters. Hinges are available to attach to square edge pilasters for an upcharge (will not have integrated privacy and will have longer lead time). Please call for lead time and pricing on flat wall or continuous hinges.
• Standard hinge cam action permits door to be set up to remain at any desired position.
• Standard keeper is for 1-1/4" round edge pilaster. Keeper for 1-1/4" square edge is available for an upcharge (will not have integrated privacy and will have longer lead time). Call for pricing and lead time on flat wall keeper.
• New latch style is surface mounted slide latch with occupancy indicator.
• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
• Lead time is approx. 3-5 days. Transit time is additional.
• Due to the UPS oversize box charge all doors must ship via motor freight.
]]>
• Door hand and and swing are NOT interchangeable. Please verify the hand and swing of your door before ordering.
• Standard doors are 1" thick x 58" high. Doors are also available 48" high, 64" high, and 72" high. Call for pricing and lead time on 48"H, 64"H, or 72"H doors.
• Doors are sized according to the width of the door opening. Actual doors are 3/8" smaller. For example, a door for a 24"W opening is actually 23-5/8"W.
• Includes standard chrome hardware to install. Satin stainless steel hardware is available for an upcharge.
• Standard hinges attach to 1-1/4" round edge pilasters. Hinges are available to attach to square edge pilasters for an upcharge (will not have integrated privacy and will have longer lead time). Please call for lead time and pricing on flat wall or continuous hinges.
• Standard hinge cam action permits door to be set up to remain at any desired position.
• Standard keeper is for 1-1/4" round edge pilaster. Keeper for 1-1/4" square edge is available for an upcharge (will not have integrated privacy and will have longer lead time). Call for pricing and lead time on flat wall keeper.
• New latch style is surface mounted slide latch with occupancy indicator.
• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
• Lead time is approx. 3-5 days. Transit time is additional.
• Due to the UPS oversize box charge all doors must ship via motor freight.
Click on diagram below for an explanation on door hand and swing:
]]>
Part Number:
A2129
]]>A2129
Part Number:
A2169
]]>A2169
Part Number:
A115523
]]>A115523
Available Part Numbers:
J893-24, J893-36, J893-48, J893-60
]]>J893-24, J893-36, J893-48, J893-60
• Complies with 2010 ADA Accessibility Standards.
• Supports a static load of 300 lbs.
• Includes a two part vinyl coated safety strap for child protection; bag hooks, built in bed liner/towel dispenser, and multilingual instructions for added convenience.
• Recessed for wall opening: 35-1/2" x 24-1/2" x 4".
• Surface mounted overall dimensions closed: 39-5/32" x 28-1/4" x 3-5/16".
• Surface mounted overall dimensions opened: 39-5/32" x 28-1/4" x 22-1/16".
]]>• Complies with 2010 ADA Accessibility Standards.
• Supports a static load of 300 lbs.
• Includes a two part vinyl coated safety strap for child protection; bag hooks, built in bed liner/towel dispenser, and multilingual instructions for added convenience.
• Recessed for wall opening: 35-1/2" x 24-1/2" x 4".
• Surface mounted overall dimensions closed: 39-5/32" x 28-1/4" x 3-5/16".
• Surface mounted overall dimensions opened: 39-5/32" x 28-1/4" x 22-1/16".
Available Part Numbers:
9018, 9018-9
]]>9018, 9018-9
Part Number:
A0345
A0345
]]>
Part Number:
A201099
]]>A201099
A7056 ]]>
Part Number:
A142043
]]>A142043
• Select a reinforced panel if you will be installing a grab bar on your panel.
• Extra weldment areas along door edges provide greater strength.
• Select from a variety of hardware to install: bright chrome or satin stainless steel two ear or one ear brackets, or full height stainless steel channels.
• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
• Lead time is approx. 3-5 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart
]]>
• Select a reinforced panel if you will be installing a grab bar on your panel.
• Extra weldment areas along door edges provide greater strength.
• Select from a variety of hardware to install: bright chrome or satin stainless steel two ear or one ear brackets, or full height stainless steel channels.
• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
• Lead time is approx. 3-5 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.
View Color Chart
]]>
Click here to go to back to toilet partition hardware home page.]]>A7055 ]]>
Part Number:
A0318
A0318
Click here to view cut sheet]]>
• 20 gauge, #304 satin finish stainless steel.
• Picture shows splash plate mounted on a screen.
• Lead time on this product is approx. 3-5 weeks.
• This is the splash plate only. Click here to order urinal screens.
]]>
- Elegance of stainless steel will enhance and compliment any design scheme.
- Highly resilient and will retain gleaming beauty for years.
- Composed of strong #304 stainless steel with a #4 satin (standard) or textured finish (special order).
- Formed and bonded under pressure to a sound-deadening honeycomb core.
- Face sheets are held rigid and permanently in place by interlocking strip welded at each corner.
- Corrosion resistant and impervious to just about any substance {See maintenance instructions for cleaning solutions that are corrosive in "material spec" section).
- Scratches can be removed from stainless steel stalls by buffing.
A9689
]]>
Available Part Numbers:
7305B, 73052B, 7305S, 73052S
]]>7305B, 73052B, 7305S, 73052S
G0225SS ]]>
• Screens over 26"W must ship via motor freight.
• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
• Lead time is approx. 10 to 15 business days. Transit time is additional.
If you want a specific width pilaster, specify in comment section as you check out.
]]>
• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
• Lead time is approx. 3 to 5 business days. Transit time is additional.
If you want a specific width pilaster, specify in comment section as you check out.
]]>
• Lead time is approx. 3 to 5 business days. Transit time is additional.
• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
If you want a specific width pilaster, specify in comment section as you check out.
]]>
• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
• Lead time is approx. 7 to 10 business days. Transit time is additional.
]]>
• Lead time is approx. 3 to 5 business days. Transit time is additional.
• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
]]>
]]>
Add privacy between urinals or at room entrances.
- All partition screens featured here are made of stainless steel.
- Corners are welded for additional strength.
- Quality and durable stainless steel used.
- Each comes with installation hardware.
- 5 different styles to choose from.
- Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
- Please note: due to recent increases in ground shipping cost for oversized boxes, you may be contacted for additional shipping charges
• Complies with 2010 ADA Accessibility Standards.
• Supports a static load of 300 lbs.
• Includes a two part vinyl coated safety strap for child protection; bag hooks, built in bed liner/towel dispenser, and multilingual instructions for added convenience.
• Recessed for wall opening: 24-1/2" x 35-1/2" x 4".
• Surface mounted overall dimensions closed: 28-1/4" x 39-5/32" x 3-5/16".
• Surface mounted overall dimensions opened: 28-1/4" x 39-5/32" x 29-3-8".
Available Part Numbers:
9017, 9017-9
]]>9017, 9017-9
Part Number:
A0347
A0347
]]>Please call if you find a product cheaper or don't see the product you need. We are here to help!
Products are cutting edge
• Meet latest ADA requirements.
• Latest in no-touch technology.
• Yield lower maintenance & supply costs.
• Increase customer satisfaction.]]>
Part Number:
A9955
]]>A9955
AA104C ]]>
Part Number:
ASNPES
]]>ASNPES
S2704 ]]>
S2704 ]]>
Find stops and keepers here.
Click here for latches.
Click here for a different type of hardware.]]>
Part Number:
A7739
]]>A7739
A6559, A6569, A6899 ]]>
K0152 ]]>
A6469 ]]>
A6459, A6379 ]]>
A6449, A6389, A6369 ]]>
A7057 ]]>
A5623, A5113 ]]>
A5823, A5343 ]]>
A5723, A5213 ]]>
• Complies with 2010 ADA Accessibility Standards.
• Supports a static load of 300 lbs.
• Includes a two part vinyl coated safety strap for child protection; bag hooks, built in bed liner/towel dispenser, and multilingual instructions for added convenience.
• Overall dimensions closed: 35-5/32" x 24-1/4" x 3-7/8".
• Overall dimensions opened: 35-5/32" x 24-1/4" x 22".
Part Number:9014
]]>A5163 ]]>
A5183 ]]>
Find stall latches here.
Click here to view keepers and stops.
Click here to view a different type of hardware.]]>
Part Number:
0477-SM-41
0477-SM-41
]]>
Available Part Numbers:
A70B1, A70B2, A7SS1, A7SS2
]]>A70B1, A70B2, A7SS1, A7SS2
Available Part Numbers:
A4101, A4101W, A4101C
]]>A4101, A4101W, A4101C
Available Part Numbers:
0473-A, 0473-1A
]]>0473-A, 0473-1A
A9099
]]>
HAP68N or HAP68BC ]]>
A8649, A8659 ]]>
A7051, A7052 ]]>
Part Number:
A124563
]]>A124563
]]>0477-SM
]]>A5173 ]]>
• Complies with 2010 ADA Accessibility Standards.
• Supports a static load of 300 lbs.
• Includes a two part vinyl coated safety strap for child protection; bag hooks, built in bed liner/towel dispenser, and multilingual instructions for added convenience.
• Overall dimensions closed: 24-1/4" x 35-5/32" x 3-7/8".
• Overall dimensions opened: 24-1/4" x 35-5/32" x 22".
Part Number:
9015
]]>9015
Available Part Numbers:
A0828, A0826, A0825
]]>A0828, A0826, A0825
View Spec Sheets:
0834-T or 0839-T
Available Part Numbers:
0834-T, 0839-T
]]>0834-T, 0839-T
]]>
Part Number:
SF301TT
]]>SF301TT
view PDF of latch Dimensions]]>
Part Number:
S7531
]]>S7531
Part Number:
S7531
]]>S7531
Please call if you find a product cheaper or can't find the product you need.
Products are cutting edge:
• Meet latest ADA requirements.
• Yield lower maintenance & supply costs.
• Increase customer satisfaction.]]>
View Spec Sheets:
0484 0485 0486
Available Part Numbers:
0484, 0485, 0486
]]>0484, 0485, 0486
View Spec Sheets:
0481 0482 0483
Available Part Numbers:
0481, 0482, 0483
]]>0481, 0482, 0483
View Spec Sheets:
04823 04833 04813
Available Part Numbers:
04813, 04823, 04833
]]>04813, 04823, 04833
Our industrial-strength commercial toilet paper holders feature top-of-the-line, durable products ideal for any public restroom. Whether it's your private office, or a facility open to the every-day public, our anti-vandal toilet paper holders will stand up to the test.
The T.P. holders we carry feature the latest technology and standards:
- ADA compliant.
- Latest in no-touch technology.
- Designed to yield lower maintenance & supply costs.
- An increase in your's and your customer's satisfaction.
Our prices are the lowest in the industry. If you can't find what you need or if you found a cheaper price, call us right away! We'll be glad to work with you!]]>
Plastic Laminate
Plastic laminate toilet partitions are used both in commercial and industrial locations. It is very affordable and the high pressure finishes are bonded under pressure to be impact resistant. When introduced to the flame test, it had the highest flame spread and smoke development of all the partition materials. It had a flame spread of 130 and smoke development of 180, which gives it a Class C fire rating.Phenolic Partitions
The Phenolic toilet partitions are impact, water, humidity and corrosion resistant. They are incredibly durable and do not support bacteria growth. The surface sheets are fused together at high temperature and recommended for areas of high traffic. The material has a flame spread of 45 and a smoke development of 110, giving it a Class B fire rating.Solid Polymer
Solid polymer stalls are water resistant and not impacted by steam and high humidity. It's ideal for people looking for a low maintenance partition that is durable and looks great. They use high density polyethylene resin with edges smoothed by machine. The material has a flame spread of 50 and a smoke development of 450, making it a Class B.Powder Coated Steel
You can't get much tougher than steel and powder coated metal is all that and more. It starts with cold-rolled galvanized steel and then hybrid epoxy. Polyester powder is applied to the steel electrostatically. The material is easy to clean with soap and water and the epoxy is resistant to fading and scuffing. It has a flame spread of 5 and smoke development of 30, making it a Class A material.Stainless Steel
Sometimes classic is the best and stainless steel partitions look sophisticated and are highly resilient. The partitions are made with #304 stainless steel and formed and bonded under pressure with a honeycomb core. It's corrosion resistant, easy to clean and can take just about anything you can throw at it. It has the best flame rating of all the materials with a flame spread of 0 and smoke development of 25, giving it a Class A fire rating. If you're interested in learning more about the various toilet partition materials, then contact us today. ]]>
For over 30 years, All Partitions has brought to you the lowest prices on bathroom partition stalls and parts. We Carry full kits in stock, 5 materials to choose from and available in various sizes to fit your custom restroom projects.
Each complete restroom stall kit includes:
Each complete restroom stall kit includes:
- Panel dividers, pilasters, doors.
- All hardware and assembly instructions.
Ask us about our contractor discounts!
Part Number:
ASE70
]]>ASE70
Please call if you find a product cheaper or need help finding a particular product. We are here to help! Products are cutting edge
• Meet latest ADA requirements.
• Latest in no-touch technology.
• Yield lower maintenance & supply costs.
• Increase customer satisfaction.]]>
ASE10, ASE20, ASE30, ASE40, ASE50, ASE60 ]]>
Select Tools and Fasteners below.
Click here to go to another type of hardware.]]>
T100-110 ]]>
A3150 ]]>
AA132 ]]>
Available Part Numbers:
C3513, C3513BC
]]>C3513, C3513BC
S6101 ]]>
HH300 ]]>
F0211N ]]>
A3760 ]]>
HH350 ]]>
AM175 ]]>
K0240 ]]>
F0300 ]]>
G0220, G0220BC ]]>
A2820 ]]>
AA112 ]]>
AA102 ]]>
K1240 ]]>
Part Number:
C3503
]]>C3503
G0225 ]]>
S7361 ]]>
G2253 ]]>
AA111 ]]>
AA101 ]]>
Part Number:
C3504
]]>C3504
S7774 ]]>
G631A ]]>
F0310 ]]>
F0207N ]]>
AM125 ]]>
G2252 ]]>
HH400 ]]>
Available Part Numbers:
SS075T, SS087T, SS106T, SS131T
]]>SS075T, SS087T, SS106T, SS131T
Shop Below for Desired Size:
A7022T, A7040T, A7073T]]>
Available Part Numbers:
A7022T, A7040T, A7073T
]]>A7022T, A7040T, A7073T
• Approximately .7 ml per use
• Easy to use and refill
• No touch, reduces cross contamination
• Battery life of up to 50,000 uses on
• 4 "C" Alkaline batteries
• Low battery indicator light
• Reservoir hold 1,000 ml
• 5" w x 10-3/4" h x 4" d
Available Part Numbers:
SF2150BK, SF2150WH, SF2150PL
]]>SF2150BK, SF2150WH, SF2150PL
Available Part Numbers:
SE800WH, SE800SS
]]>SE800WH, SE800SS
• These most popular metal lockers, available in 72 HOURS
• 5 POPULAR COLORS: Gray, Almond, Burgundy, Blue Frost, Mist Green
• NO ADDED COST
• 15 designer colors available in normal ship time
• The visually appealing and very durable Traditional Collection is our most widely distributed locker line.
• Offers the most value for typical locker applications.
• This collection is available in a full range of spacious sizes, from single- to six-tier configurations, as well as two-person, sixteen-person and wall-mounted.
• Featuring 16 gauge doors, frames and bottoms and 24 gauge tops, sides, backs and shelves.
• all Traditional lockers come standard with features that allow for easy and quiet operation.
STANDARD FEATURES • Stainless steel recessed handle for safety
• Continuous full-length piano hinge for security
• 2 mil powder coated in any of 15 designer colors
• Rubber door silencers for quiet operation
OPTIONAL FEATURES • 1 to 6 tier; 2 person lockers per frame,
• Range of widths, depths and heights
• 5 colors in 72 hours; 15 colors available
• Against wall Surface*, recessed, recessed with trim
• 4" high continuous base*, no base required, 6" high legs, 6" high legs w. front & side closed
• Sloped*, flat top
• Riveted*, welded construction
• Built in combination lock*, user combination lock, keyed lock
"*" most common.
Call for information. Send in a drawing for us to quote from.]]>
Available Part Numbers:
20200-1, 20200-2, 20200-3
20200-1, 20200-2, 20200-3
]]>
Part Number:
0199
]]>0199
Part Number:
0196
]]>0196
Part Number:
0192
]]>0192
A2888, A2868, A0175C ]]>
A0162, A0163, A0175, A0183]]>
A0162, A0163, A0175, A0183 ]]>
• Part number A1280 is pictured.
Available Part Numbers:
A1590, A1280, A1330
]]>A1590, A1280, A1330
Available Part Numbers:
A0810, A0807, A0804, A0801
]]>A0810, A0807, A0804, A0801
HH325 ]]>
A1323 ]]>
A1669, A1319 ]]>
A1289, A1339 ]]>
A1283 ]]>
Part Number:
A1483
]]>A1483
Available Part Numbers:
AWB25, AWB27
]]>AWB25, AWB27
A1329 ]]>
• Vanity tops are 24"D x 120" long. Come with 4"H back splash, 4"H front apron, 4"H side splashes, and vanity supports (1 every 36" max distance). Items must be cut down and assembled in the field by others. They do not come pre-cut out for sinks.
• All vanities ship via motor freight. Be sure to check "Motor Freight" during check out.
]]>
A7813 ]]>
Part Number:
A0444
]]>A0444
HAWSZ ]]>
Part Numbers: SE840WH
]]>For shower openings up to 42"W, curtains should be an additional 6" wider than the opening. For shower openings over 42"W, curtains should be an additional 12" wider than the opening.]]>
Part Number:
0502
]]>0502
HH0145, HH0146 ]]>
HH0145, HH0146 ]]>
A3710 ]]>
A3010 ]]>
A3720 ]]>
A3020 ]]>