Stamped Stainless Steel Door Hardware

Stamped stainless steel; 1-7/8" between screws; 1/8" bar to door clearance. Use where door and pilaster are same thickness. Use A7055, A7056 and A7057 together.

1 7/8" between screws. Use with A7057 or A6389

1 7/8" between screws. Use with A7057 or A6389

1 7/8" between screws. Use with A6499 and A7056.

1-7/8" between screws. Use with keeper A6539

Use with latch #A6409.

1 7/8" between screws. Use with A6499 and A7056

Inswing w/ tab. For 3/4" thick door. Use with latch #A7055. 1 7/8" between screws.

Outswing. 1-7/8" between screws. Use with latch A7055.

This latch is intended for emergency access situations. Use with latch A7055.

Stamped stainless steel. 1-1/2" between screw centers. Generic replacement for Bobrick.

Door plate with bumpers. Stamped stainless steel. 1-1/2" between screw centers. Generic replacement for Bobrick.

Surface mounted stainless steel slide bolt latch with rubber bumper. Generic replacement for Bobrick.

Surface mounted stainless steel keeper for A9689 latch. Generic replacement for Bobrick.

Surface mounted latch and keeper. For inswing or outswing doors. Satin stainless steel.

Surface mounted latch with "Occupied" indicator. Satin stainless steel. Fits doors 1" thick.

5" between screw holes.

2" projection.

5/8" x 2 3/4" projection.

1" wide x 1" projection. Handicapped.

Adjustable tension spring loaded surface mounted hinge set. Available in satin brushed finish or polished bright finish. 3/32" thick stainless steel. Available 4"H or 5"H.

57 1/2" OR 54" high. Surface mounted hinge set #'s A70C1, A70C2, A70C4 AND A70C5 are self closing. Without spring # A70C3 is for any hand door and must be closed manually. Please call for 71.5" long hinges.