Cast Stainless Steel Door Hardware

Cast stainless steel. 2-3/4" between screws. 5/8" bar to door clearance.

2-3/4" between screws. Offset bar for use when door and pilaster are same thickness. 9/16" bar to door clearance.

2 3/4" between screw holes. Cast stainless steel.

3-1/2" between screws. 5/8" bar to door clearance - most common.

3-1/2" between screws. Offset bar for use when door and pilaster are same thickness. 9/16" bar to door clearance.

3 1/2" between screw holes. Cast stainless steel.

Surface mounted slide latch for 3/4", 7/8", or 1" thick doors. Satin stainless steel. 3-1/2" between screw hole centers.

Surface mounted slide latch for 3/4", 7/8", or 1" thick doors. Offset for use when door and pilaster are the same thickness. Satin stainless steel. 3-1/2" between screw hole centers.

Cast stainless steel. Click here to view PDF of latch Dimensions

Latch only. Use with keeper A147413 and strike A5173. Can also be used with keeper bumpers HAP54, HAP55, HAP56, HAP57, HAP58, and HAP59.

Keeper only. For use with A6983 latch ONLY.

1-1/2" between screws. Brushed satin/stainless steel.

1-1/2" between screws. Cast stainless steel.

1-1/2" between screws. Brushed stainless steel.

1-1/2" between screws. Brushed stainless steel. For square edge pilaster. Select pilaster thickness from dropdown menu.

1-1/2'' between screws. For square edge pilaster. Allows emergency access when properly installed. Select pilaster thickness from dropdown menu.

1 1/2" between screws.

Brushed stainless steel. Mounts to flat wall. For 1" thick door. Allows for emergency access. 1-1/2" between screws.

Brushed stainless steel. Mounts to flat wall. For 1" thick outswing door. Allows for emergency access. 1-1/2" between screws.

Mounts on door.

3-1/2" projection. Brushed/satin finish.

3" Projection, 1-3/4" High.

Mounts on wall.

Square barrel type. Includes upper and lower hinge.

3" high and 5 1/2" long. Cast stainless steel with brushed/satin finish.