Click on image to enlarge. Picture shows grab bar with concealed flanges. Length is from center to center of flanges.

Click on image to enlarge.
• 1-1/2" tubing diameter, 18 gauge, and flanges 1/8" thick stainless steel type 304 in satin finish.
• Bar has 1-1/2" inside of bar to wall distance.
• Closure plate is 1/8" thick and goes to wall.
• All welded construction.
• Front mounting unit has 3 holes through each flange.
• Rear Mounting model has three welded-on threaded rods with nuts and washers.
• We have a full line of security accessories. Call for information.


Shop Below For Desired Size:
160, 161, 162, 163, 164, 165, 166, 167, 168, 169

Click on image to enlarge. Length is from center to center of end flanges. Center post is added half way between for added strength.

Click on image to enlarge. Many sizes available. Dimension "A" is 1 flange side; dimension "B" is 2 flange side.>

Grab bars are not supplied with mounting hardware. Choose one of the kits to mount each flange.

Grab bars are not supplied with mounting hardware. Choose one of the kits to mount each flange.

Shop Below For Desired Option:
KGB1D, KGB2D, KGB4D, KGB5D

Grab bars are not supplied with mounting hardware. Choose one of the kits to mount each flange.

Shop Below For Desired Option:
KGB1B, KGB2B, KGB4B

Concealed mounting plate is attached to wall. Grab bar connects to plate. Plate is 2 x 11/16" diameter and 3/8" high.

1 1/4" diameter bar with exposed screws; mounts on wall and floor; swings away from wall into position; when in position bar projects 30" out from wall and is 33" off the floor.

1 1/4" diameter bar with exposed screws; mounts on wall; swings up 90 degrees from horizontal; projects 30" out from wall when in horizontal position. Wall bracket is 6" w x 9"h.

30" wall to front of bar. 33" height. 1 1/2" diameter, snap on flanges. Satin finish.

• Standard is a satin finish.
• Order with or without knurling.
• Contact us for peening or a bright finish.