Stainless Steel Toilet Partition Stalls

Stainless Steel Stalls

Features for Stainless Steel Toilet Partition Stalls

  • Elegance of stainless steel will enhance and compliment any design scheme.
  • Highly resilient and will retain gleaming beauty for years.
  • Composed of strong #304 stainless steel with a #4 satin (standard) or textured finish (special order).
  • Formed and bonded under pressure to a sound-deadening honeycomb core.
  • Face sheets are held rigid and permanently in place by interlocking strip welded at each corner.
  • Corrosion resistant and impervious to just about any substance {See maintenance instructions for cleaning solutions that are corrosive in "material spec" section).
  • Scratches can be removed from stainless steel stalls by buffing.
Floor Mounted / Overhead Braced - Stainless Steel Stalls
Floor Mounted/ Overhead braced partitions have anti-grip headrail between the tops of the pilasters; pilasters are 82" total height; Bottom of door and panel are 12" off the floor.

All hardware and assembly instructions are supplied.
Floor Mounted/ Anchored - Stainless Steel Stalls

Floor mounted installations have no headrail. Pilasters go from the floor to the top of the doors and panels. The total height is 70". There is a 12" clearance between the floor and the doors and panels.

All hardware and assembly instructions are supplied.
Ceiling Hung - Stainless Steel Toilet Stalls
Ceiling hung installation pilasters attach to a ceiling steel structure. Bottom of the doors, pilasters and panels are 12" off the floor.

Standard ceiling heights are 7-1/2, 8', 8-1/2', 9'.

Installation instructions and all hardware are included.
Floor-To-Ceiling - Stainless Steel Restroom Stalls

Pilasters attach to the floor and ceiling. There is a 12" clearance between the floor and the doors and panels. Pilasters are a maximum height of 10". Standard material is #4 satin finish.


Includes installation instructions and all hardware to install.